Do not put the dry petals on the iPhone 4 case unless the stacking height of these petals is not more than 1.5 mm,make sure the dried petals are suppressed very flatly.
iPhone 4 case a (white) a bottle of AB epoxy glue a box of colored sequins several dried
A transparent plastic cup a ice cream stick a Marking pen Marker a timer a bottle of glue a ruler a bottle of nail polish remover 2 pieces of swab
Step 1:buy resin glue in the hardware store
Clean iPhone 4 case, make sure nothing left on the back of iPhone 4 case. Above are some of the samples.
Take out of dried petals, put the petals on the iPhone 4 case.
Follow the trick on how to place the petals, those with light color on the top, dark below.
Larger petals coated with a little glue stick to the iPhone case.
Put the ruler into a plastic cup, mark 3/8 inch (about 9.5mm) and 3/4 inch (about 19mm).
Pour resin into the first plastic cup to 3/8 inch, waiting for 2 minutes set by the timer, stir with the ice cream stick.
Poured the resin onto the iPhone 4 case from the middle to around.
Smooth resin with the ice cream stick,make sure there is none of air bubbles between the resin and flower.
After standing for 1-2 hours, use a cotton swab dipped in nail polish remover to clean the resin overflowed on the edge of the iPhone 4 case.