How to diy a iPhone 4 leather case

By | February 19, 2016

iPhone 4 leather case

In this tutorial, Onu-mall will show you how to use a junk bag to make a iPhone 4 leather case. Here we go.

The tools and materials need to be prepared for the old leather making iPhone 4 leather case:

Precision chisel, hand stitches, cone, rulers, scissors, thread of wax, sheep skin.

Steps:

old leather garments to diy iPhone leather case

1.Find an old bag not used, or old leather garments no longer wore .

Cut sutures along the seams to diy iPhone leather case

2.Cut sutures along the seams

cut liner down to diy iPhone leather case

3.If there is liner, cut it down.

Glue together the back of the leather and liner to diy iPhone case

4.Glue together the back of the leather (flesh side of layer) and liner

rule the size to diy iPhone leather case

5. do not cut unless make sure the size: 14.4cm × 13.2cm(the size of iPhone 4)after the glue dry.

one end folded radiused to diy iPhone leather case

6.Make sure that one end folded is radiused.

Glue inside edges together to diy iPhone leather case

7.Glue inside edges together to make sewing easier and keep the alignment of the leather.

Use a pencil mark where required stitches to diy iPhone leather case

8.Use a pencil mark where required stitches, try to maintain a consistent distance between the pinhole.

Perforate with an awl on the marked sign to diy iPhone leather case

9. Perforate with an awl on the marked sign. ( use the pitch wheel will improve efficiency.).

Start sewing at the openings to diy iPhone leather case

10. Start sewing at the openings, you can multi-line to ensure a secure perimeter of the opening.

sew at the openings to diy iPhone leather case

11. Sew openings to prevent open.

seam down along the edge to diy iPhone leather case

12.Seam down along the edge once finishing sewing the opening 13.

13. Finally, reverse a few stitches.

Burned the thread cut with a lighter to diy iPhone leather case

14. Burned the thread cut with a lighter (If it is to use glue cotton line)

Stain the edge to diy iPhone leather case

15. Stain the edge (tangent plane). If there is nothing dyed tool around you , switch to markers to paint it black.

A iPhone 4 leather case is done. Is not it simple?

Leave a Reply

Your email address will not be published. Required fields are marked *